Boston Scientific LATITUDE 6280 Manual Del Paciente página 29

3. Insert the USB connector of the USB Cellular
Adapter into one of the USB ports labeled
. Refer to "Figure 5. Using the Cellular Data
Network" on page 24.
• The power indicator
Adapter is lit if properly connected. It will remain
lit except during a LATITUDE system reboot.
Note: The wireless indicator
USB Cellular Adapter will flash at various times
and at various sequences. This indicator is of no
concern during normal operation.
4. When the Heart button flashes, press it.
• Your Communicator's wave lights will flash
green in sequence and repeat for several
minutes as shown in "Using the Heart Button"
on page 37.
• If you have previously completed initial setup,
the Heart button will not flash at this point.
5. Your Communicator has successfully connected
to the LATITUDE system if the wave lights are lit a
solid green as shown below.
Setup is complete, and no further action is needed
at this time. Leave your Communicator plugged in.
• If this process takes longer than several
minutes, software download and installation
on the top of the Cellular
LATITUDE Communicator Patient Manual
TM
on the top of the
25