Brinkmann 810-5515-0 Manual Del Propietário página 13

Smoker Box
Handle
Washer
Smoker Box
Door
Spring
Door Retaining
Bracket
OPEN
CLOSE
Choose a good, cleared assembly area and
get a friend to help you put your smoker
together. Lay cardboard down to protect
smoker finish and assembly area.
CAUTION: Some parts may contain
sharp edges. Wear protective
gloves if necessary.
Step 1
Slide washers and spring onto latch end of
handle as illustrated. Insert handle through
hole in door and slide door retaining bracket
over handle. Secure door retaining bracket
using two M6 X 12 mm Phillips head bolts.
Repeat for other door.
Note: Door handles must be pushed in
while turning handles to "CLOSE"
position.
Step 2
Attach side handles to smoker using eight
M5 X 10 mm bolts.
Note: With the help of a friend, turn the
smoker cabinet upside down.
Step 3
Attach legs to bottom of smoker using twelve
M6 X 12 mm bolts.
13