Care And Maintenance; Technical Data; Troubleshooting; Rating Plate - Olsberg Orayonne Instrucciones

Care and maintenance

The glass radiation heater is designed in such a way that the heat is emitted in the form of radiation
through the glass panel. It does not contain any parts that require regular maintenance.
To clean the glass radiation heater we recommend using a conventional glass cleaner. Do not use
abrasive detergents, as this could cause scratches to the class and the coated surfaces of the
appliance.
Caution: Before cleaning the heater, ensure that it has cooled down!

Technical data

Dimensions
Model HxWxD
(mm)
15/2251 445x 600x59
15/2261 445x1000x59
15/2271 445x1400x59
15/2281 445x1800x59
15/2351 600x 600x59
15/2361 600x1000x59
15/2371 600x1400x59
15/2381 600x1800x59
* protection rating IP24 only if installed on wall; protection rating IP20 for ceiling installation

Troubleshooting

Appliance fails to heat:
•
Fuse tripped or defective?
•
External switch on?
•
Nominal temperature of room thermostat set to a temperature that is below the actual room
temperature?
Heat radiation too low:
•
Distance between glass radiation heater and person too big?
•
Appliance too small?
•
Objects placed between the glass radiation heater and the person?

Rating plate

The technical data specific to this model are specified on the rating plate. The plate is located at the top
or the left of the appliance, depending on its installation.
Model number
Weight
32
Power
Rated voltage consumption
(W)
180
310
440
570
1/N/PE 230V
270
470
670
870
Protection Protection
rating class
IP24* I
Spray Earth
Water conductor
protection connection
Serial number
Weight
(kg)
8
14
19
25
11
19
26
34