Klarstein 10032102 Manual De Instrucciones página 57

How long does the machine keep the grinding and brewing settings?
• As long as the machine is plugged in. If the machine loses power you have to reset
the time and personal settings.
I want a full pot of coffee at 8:00. What time should I program the machine
to start?
• Set the Auto-On timer 15 minutes earlier (in this case at 7:45).
The grinder makes a loud noise, no coffee is processed.
• Ground coffee is blocking the grinder or grinder chute. Follow cleaning instructions
in chapter CARE AND CLEANING.
• Once cleaning instructions have been followed, attempt to run a Grind & Clean
Cycle.
• A stone blocks the grinder. Remove bean container and upper burr to check for any
stones or foreign objects. If you cannot locate and remove the stone on your own,
please call
How can I increase the strength of the coffee?
• Select 12 in the CUPS setting but only fill the water tank to the 8 cup marking.
• This will give you more ground coffee in the filter and increase the strength of the
brew.
Grinder suddenly stopped during grinding cycle or beans are not feeding.
• Check that bean container lid is pressed down and fully engaged.
• Press the „Ground Coffee" and „Auto" buttons at the same time to clear the grinder
of any left over coffee beans stuck in grinder.
EN
57