Parameters Setting - Gram FV 120 Serie Manual De Utilización

PARAMETERS SETTINg

You can reset the parameter setting as follow steps.
• Turn on the balance.
• Keep the pan empty.
• Press the
0.0000g is displayed.
• The display will show
• Press the
For example, when you will setup parameter to be C2-02, refer to the
following instructions:
• Turn on the balance.
After display is 0.0000g, press the
•
y" will be display (y is stored in the balance at last time or stored default).
• Press the
balance.
• Press the
• Press the
• Press the
store data or press the
After operation, "S--END" will be displayed.
•
• Setting is done and the balance will return to weighting status.
14
key and key to enter Parameter Setting Mode after
Cx" 0y§ (x=1´9 y=0´6).
※
key to select "x" and the
key, the display will be "C2-00", This is default in the
key till C2-02 is displayed.
key, "o" and "C3-00" will be displayed.
key , the display will be "SAVE ---", press the
without storage.
key to select "y".
key, then press the
key, "C1-
key to