Connecting - Optimus MI Serie Manual De Instalación Y Funcionamiento

12. CONNECTING

How to connect the receiver:
1- Connect the audio output of receiver to mixer or amplifier.
 MI-RD1CU16: The XLR output or 6.3 mm unbalanced output jack can be selected to connect the
AF output to a mixer or amplifier.
 MI-RD2CU16: The XLR output or 6.3 mm unbalanced output jack can be selected individually to
connect the AF output to a mixer or amplifier for volume control. Switch the "Mixed" on the back
to ON. This allows to mix the RX1 and RX2 signals to RX1 6.3 mm unbalanced output jack and
then to a mixer or amplifier for volume control.
2- Connect the power.
 Connect the AC/DC adapter: Check that the DC current and voltage ratings of the adapter match
the label on the unit. Connect the DC terminal to the "DC input" port on the unit, and the AC end
to an AC socket.
 Set the parameters: Turn the power on and set the parameters of receiver according to the
setting instructions.
Caution! Secure the power cable on the fastening hook of anti-pulling clip in order to prevent it
from falling.
MI SERIES Version 1.2
MI Series
Wireless system
Page 11 of 27