Pairing Remoset U - Optimus MI Serie Manual De Instalación Y Funcionamiento

MI Series
Wireless system

14.3 PAIRING REMOSET U

Once the parameters are set, push the "REMOSET U" button and the digital pairing data will be sent
to the transmitter via ultrasonic transmitter. The receiver indicator will flash during data transmission
while in the emitter the word "Sync" will appear on screen. In case of MI-MMU16 also status light will
flash blue. When the synchronization is completed, the receiver will receive the corresponding data
and the indicator will stop flashing. If the signal is not received for a certain period of time, the
indicator will flash slowly to inform pairing failure (the slowly flashing indicator can be reset by
pushing any button).
Note: the optimum pairing distance is 30 cm, ±30º.
Page 19 of 27
MI SERIES Version 1.2