Parameter Setting Menu (Param) - SOMFY FX24 Manual De Instalación

PARAMETER SETTING MENU (PArAM)

Press "OK" to display one of the following submenus:
Display By default
Automatic closure 10 s
time
(tcA)
Motor 1 torque 50 %
(R1t)
Motor 2 torque 50 %
(R2t)
Motor 1 slowing down 45 %
torque
(R1t SLoW)
Motor 2 slowing down 45 %
torque
(R2t SLoW)
Opening time delay 1 s
(oPEn dELAY t IME)
Closing time delay 1 s
(cLS dELAY t IME)
Motor 1 fast travel time 15 s
(R1 FAST t IME)
Motor 2 fast travel time 15 s
(R2 FAST t IME)
Note: The slow down time (during opening and closing) is obtained by timing the duration of an operation and entering a lesser value
in the "Motor fast travel time" parameter setting. If for example an operation lasts for 25 s, by entering a value of 20 s, we will obtain a
slow down time of 5 s.
Slow down speed 50 %
(SLow SPEEd)
10
Description
Setting the automatic closure time (if tcA is active in LoGic).
Automatic closure time setting from 3 to 120 s.
Setting the minimum torque value for motor 1 required to move the gate.
Motor 1 torque setting value between 1% and 99%.
Setting the minimum torque value for motor 2 required to move the gate.
Motor 2 torque setting value between 1% and 99%.
Setting the torque value for motor 1 required to slow down the gate.
Motor 1 slowing down torque setting between 1% and 99%.
Setting the torque value for motor 2 required to slow down the gate.
Motor 2 slowing down torque setting between 1% and 99%.
Delay in starting motor 1 opening compared with motor 2, adjustable from 1 to 10 s.
Delay in starting motor 2 closing compared with motor 1, adjustable from 1 to 25 s.
Time spent at normal speed by motor 1 (not slowed), adjustable from 1 to 30 s.
Time spent at normal speed by motor 2 (not slowed), adjustable from 1 to 30 s.
Slow down speed reduction (from 0% to 99%) in relation to normal speed. A 0 value
corresponds to disabling the slow down function.
Copyright © 2008 Somfy SAS. All rights reserved.