Alliance Laundry Systems BF35PV Instalación/Mantenimiento página 36

Installation
Rear Panel
1/4-20 Fiberlock Nut
1/4-20 x 5/8 Screw
Recirculation
Adapter Plate
1/4-20 Fiberlock Nut
1/4-20 Fiberlock Nut
1/4-20 x 5/8 Screw
No. 48
Hose Clamp
Wet Clean Drain
Adapter Plate
1/4-20 x 5/8 Screw
1/4-20 Fiberlock Nut
Flex Drain Hose
Base Frame
Premium Wet Clean Module Installation – Internal Plumbing
4. Wiring the drain valve on the canister/
filter/pump assembly (See Drawing No.
633583, included with kit):
a. Remove drain valve motor cover on the
washer-extractor.
34
Recirculation inlet hose
No. 28 Hose Clamp
Capped with Rubber Plug
Before Inlet Hose Installation
Figure 20
b. Extend 2-conductor cable already
installed on the drain valve on the
canister/pump/filter assembly to the left
drain valve on the washer-extractor.
c. Splice 2-conductor cable with the left
drain valve motor leads, using the blue
female quick-disconnect terminals
included in the kit.
Shell
Capped with Sump
Plug Before Hose
Installation
Recirculation
Drain Outlet
Sump
Inner Drain Hose
No. 48
Hose Clamp
Z015I3A
F232058