Installation - Royal Sovereign ARP-7010 El Manual Del Propietario

INSTALLATION

Unpack your New Portable Air Conditioner and let the machine stand upright for 2 hours before starting.
Unpack all parts listed below. If any parts are missing do not return this product to the place of purchase.
Please visit our website www.royalsovereign.com and click on the "Support" tab .
Part 1: Attaching exhaust hose
1. Extend one end of the exhaust hose.
2. Take the hose connector and twist it counterclockwise onto one end of the exhaust hose.
3. Extend the opposite end of the exhaust hose.
4. Take the hose adapter and twist it counterclockwise onto the unused end of the exhaust hose.
Part 2: Attaching exhaust hose
1. Hold the exhaust hose parallel to the floor with the hose connector positioned Left to Right.
2. First insert the long tab into the left side of the Air outlet. Then push the tabs on the right side
of the air outlet down into the tabs connected to the unit.
Part 3: Installing window slider kit
1. Open the window and place the window slider on the inside edge of the window.
2. Adjust the window slider to the width of the window.
3. Insert a screw into the top of the window slider to secure it at the correct length.
4. Take window slider out and attach to exhaust hose by snapping the hose adapter into
the hole on the window slider. Make sure that the tabs on the window slider are
facing outside.
5. Extend exhaust hose to desired length.
6. Place window slider and hose into the edge of the window.
7. Close window to secure slider.
urchase.
6
Fig 1.
Fig 2.
Fig 3.