Program The Travel - Merik LiftMaster PREMIUM Serie Guía De Usuario

Adjustment
1

Program the Travel

Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY
INJURED or KILLED by a closing garage door.
• Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal system.
• After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact with
1-1/2" (3.8 cm) high object (or 2x4 laid fl at) on fl oor.
1.1
Press and hold the
Adjustment Button
until the UP Button
begins to fl ash and/or
a beep is heard.
1.3
Once the door is in the
desired UP position press
and release the Adjustment
Button. The garage door
opener lights will fl ash
twice and the DOWN
Button will begin to fl ash.
1.5
Once the door is in the
desired DOWN position
press and release the
Adjustment Button. The
garage door opener lights
will fl ash twice and the UP
Button will begin to fl ash.
1.7
Press and release the DOWN Button. The door
will travel to the programmed DOWN position.
Programming is complete.
12
1.2
1.4
1.6
* If the garage door opener lights are fl ashing 5
times during the steps for Program the Travel, the
programming has timed out. If the garage door opener
lights are fl ashing 10 times during the steps for Program
the Travel, the safety reversing sensors are misaligned
or obstructed. When the sensors are aligned and
unobstructed, cycle the door through a complete up
and down cycle using the remote control or the UP and
DOWN buttons. Programming is complete. If you are
unable to operate the door up and down, repeat the steps
for Program the Travel.
www.liftmaster.com/catalogresourcesv3/en-us/shared/fi les/tucmanuals/114a4974.pdf
Press and hold the UP Button until the door is
in the desired UP position.
NOTE: The UP and DOWN Buttons can be used to
move the door up and down as needed.
Press and hold the DOWN Button until the door is
in the desired DOWN position.
NOTE: The UP and DOWN Buttons can be used to
move the door up and down as needed.
Press and release the UP Button. When the door
travels to the programmed UP position, the
DOWN Button will begin to fl ash.
For the complete manual visit: