Selecting And Printing Images - Canon SELPHY CP800 Guia Del Usuario

Selecting and Printing Images

You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
1
2
3
Label side
4
5
Number of copies
for the displayed
image
Turn on SELPHY.

Press and hold the q button until the screen shown at
the left displays.

To turn the power off, press and hold the q button again
until the displayed screen changes or turns off.
Adjust the screen for ease of viewing.

Raise the LCD monitor and adjust until the screen is
easily visible.

Do not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Approx. 45°
Insert a single memory card into the slot.


Insert a memory card fully into the appropriate slot.
The screen in Step 4 below (image display screen)
will display.
Select an image.

Press the l r buttons to select an image to print.

If you press and hold one of the l r buttons, the display
jumps by 5 images.
Select the number of copies.

Press the ud buttons to select the number of copies.

If you press and hold one of the ud buttons, the number
Total number
increases or decreases by 5 copies.

of images to be
You can select up to 99 copies per image.

printed
To print another image, repeat Steps 4 and 5.
(p. 7)
13