Quick Start Instructions; Pump Diagram - Lansinoh AFFINITY Instrucciones Para El Uso

Quick Start Instructions

If you are using the Lansinoh
it is important to read the full instruction manual before you begin.
Start with Phase I (Let-Down Phase)
Turn on power by pressing the On/Off button.
This will take you into Phase I – the Let-Down
Phase.
Phase II (Expression Phase)
The pump will automatically switch into Phase II
after two minutes.
If you want to bypass or reduce Phase I, press
the Let-Down button.
The pump will switch to Phase II immediately.
Adjust suction
While you are in Phase I or Phase II, you may
adjust suction level by pressing (+) or (-) next
to the suction icon.
Adjust cycle
While you are in Phase II, you may adjust the
cycle level by pressing (+) or (-) next to the
cycle icon.
Change to Phase I (Let-Down Phase)
At any time during the Expression Phase, you
can switch back to Phase I (Let-Down Phase)
by pressing the Let-Down button.
Stop pumping
Turn the pump off with the On/Off button.
3
Affinity Breast Pump for the first time,
® ®
Indicator in
LCD screen
L1
up to
L8
L1
up to
L6

Pump Diagram

1 2
Basic Controls, Display and Features
1 Power, On/Off button
2 Cycle increase/decrease button
3 LCD screen
4 Suction increase/decrease button
5 Let-Down button
6 Cycle indicator
7 Time/level indicator
8 Low battery indicator
9 Let-Down/Stimulation Phase indicator
10 Expression Phase indicator
11 Suction indicator
Tubing Adapter Input
3 4 5
6 7
8 9
11
10
4