Changing Auxiliary Input Sensitivity - Eclipse CD5100 Manual Del Propietário

About optional unit

Changing auxiliary input sensitivity

The sensitivity of the auxiliary mode can be
changed.
Press the [CUSTOM/MENU] button
1
for more than two seconds.
The Menu
activated.
Press the [SELECT] (Upper/Lower)
2
to select FUNC then press the
[ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/Lower)
3
button to
Sensitivity.
The AUX sensitivity
activated.
Press the [SELECT] (Upper/Lower)
4
button to select the sensitivity
mode.
Pressing the button allows you to
toggle through sensitivity modes as
follows:
Low ↔ Mid ↔ Hi ↔ Low ↔
The selected settings will take effect.
Press the [CUSTOM/MENU]
5
[RTN] button to exit function mode.
76
Selection mode
select the AUX
mode
or
is
is