The exhaust hose must be kept parallel and must not be bent up or down.
• A∙distance∙of∙50cm∙(19.5")∙minimum∙must∙be∙kept∙∙∙∙
between the filter side of the unit and wall or any other obstacles".
Unpacking Instructions
• Place the unit in the correct upright position before unpacking.
• Cut the two packing straps.
• Slide the carton in an upwards motion and it will release from the base.
• Grip the carry handles located on either sides of the unit and carefully lift until it slides out of the foam base.
• Install the exhaust hose on the unit before operating the unit.
IdentIfIcatIon of paRtS
1. Control panel
2. Remote control receiver
3. Adjustable air vent
4. Joint tube
5. Exhaust hose
6. Hot air filter
7. Drain hole
8. Hot air outlet
9. Cool air filter
Exhaust hose
Joint tub
⑴
⑵
⑶
Window Kit
5
⑷
⑸
⑻
⑹
⑼
⑺
Remote control
Hose connector
ARP-51400HA
fan blade
Hepa filter