• Never use the vehicle on steep slopes or near steps or stairs. This vehicle is not suitable for use on public
highways.
• Children should always wear shoes when riding in or driving a ride-in/ride-on vehicle.
• The use of a certified bicycle helmet is strongly recommended.
• Do not allow children to place their hands, feet or any part of their body, clothing or other articles near the
moving parts while vehicle is in operation.
• Do not allow the electrical components, motors, wiring, switches of your motorized vehicle to become wet and
never wash it with a hose.
• Never use gasoline or other flammable substances near the vehicle.
IF THE VEHICLE DOES NOT OPERATE?
•When operating in overload conditions, such as running the vehicle against a fixed object,
through soft deep sand or mud, or over rough or uneven terrain, the overload circuit
breaker will automatically disconnect the power. After 10 or more seconds, the circuit
breaker will automatically reset, however-you must eliminate overload conditions to
resume normal driving.
• Check that all plugs are properly connected.
• Check electrical switches. Replace if necessary.
• Check that the battery is connected to the electrical system.
IF THERE IS NO POWER?
• Fully recharge the battery. If the problem persist, check with an Authorized PEG PEREGO Service Center.
For your convience, PEG PEREGO offers after-sales service, directly or through a network of authorized service centers
for repairs or replacement parts.
If you have any questions about your Peg Perego vehicle, please call our toll-free service lines at;
Trained customer service representatives are available to take your call in English or Spanish.
FCC STATEMENT (United States Only)
In reference to the radio:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
Note: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
PROBLEMS?
CUSTOMER SERVICE
U.S.A CALL 1-800-728-2108
U.S.A. LLAME GRATIS 1-800-225-1558