Repairs; Warranty - Rowenta DELTA FORCE EXTREME LITHIUM Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REPAIRS

IMPORTANT: If you notice that your vacuum cleaner is not functioning properly, before any revision,
turn it off by placing the Stop/Start button in the Stop position.
Repairs should only be carried out by specialists using original replacement parts. To attempt the repair
of an electronic appliance at home may be hazardous to the user.
If your vacuum cleaner does not start
Make sure that the charger is completely unplugged from the appliance. If it is, it means that the
appliance is not charged, so proceed to charge it.
If the 3 running time indicators start to flicker simultaneously and very rapidly when you plug the charger
to the vacuum cleaner, it means that you are not using the appropriate charger or that the one you are
using is faulty.
If your appliance does not vacuum
• The electro-brush is dirty: clean it.
• The separator is clogged up: remove the dust container and clean the separator.
If your vacuum cleaner seems less efficient, makes noise or whistles
• The tube or the hose are partially clogged up: unclog them.
• The dust container is full: empty and clean it.
• The dust container is not well positioned: place it correctly.
• The Delta vacuum head is dirty: demount the electro-brush and clean it.
• The foam motor protection filter is saturated: clean it.
If the separator gets filled with dust
• The separator sometimes accumulates dust. Make sure that nothing is blocking the duct between
the separator and the dust container.
• The dust container opening is blocked: Remove the dust container, empty it and clean the opening.
The vacuum head moves with difficulty
Lower the vacuum speed by moving the appropriate switch button.
If the problem persists, take your vacuum cleaner to the authorized Rowenta Service Center nearest
to your home. See the list of authorized Rowenta Service Centers or contact the Rowenta Consummer
Service department.
If your appliance gets overheated
The safety feature will turn on automatically. If the vacuum cleaner is being charged, the charge stops.
If the vacuum cleaner is being used, the motors stop and the 3 running time indicators flash
simultaneously and very rapidly.
In this case:
- turn off the appliance if it is on (set the Stop/Start button to Stop)
- or stop charging if the appliance is being charged (disconnect the charger)
- and let the appliance cool off for at least 1 hour.

WARRANTY

This product has been designed for domestic use only. In the event of any commercial use, inappropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee
will not apply.
HELPLINE:
If you have any product problems or queries, please contact our Customer Relations Team first for
expert help and advice: 1-800-418-3325
www.rowenta.com
Read the instructions for use carefully before using your appliance for the first time: in the event of
any use that does not comply with the instructions, Rowenta shall accept no liability.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido