Safety Instructions - lbx OS20 Serie Manual De Usuario

1. Safety Instructions

When working, wear the personal guard to avoid the risk from:
•
• Splashing liquids
• Broken glass containers
Follow the safety instructions, guidelines and accident prevention regulations.
•
Do not touch the running parts, moving instrument care not rolling your fingers.
•
Set up the instrument in a spacious area on a stable, clean, non-slip, dry and fireproof surface.
•
Do not operate the instrument in explosive atmospheres, with hazardous substances or under
water.
Please note the vessel when set up the speed, to avoid splashing the sample. If the instrument
•
does not run smoothly, please decrease the motor speed.
Firmly secure the accessories and vessels in place to avoid damage or risk.
•
Preparation of samples may lead to dangerous flammable substances. Only process samples
•
that will not react dangerous.
Use the standard accessories listed in the "accessories" section, and follow the instructions to
•
use accessories to ensure safety. Please switch off the power before assembly of accessories,
confirm the instrument and accessories are intact before switch on each time.
The instrument only be opened by expert, please switch off before use.
•
The voltage stated on the nameplate must correspond to the mains voltage.
•
Warning!
Read the operating instructions carefully
•
before use.
Ensure that only trained staff works with
•
the instrument.
Protective ground contact!
Make sure that socket must be grounded
•
(protective ground contact) before use.
Table 1
3