System Assembly - lbx OS20 Serie Manual De Usuario

4.2. Display

5. System Assembly

a. Install stand
The stand must be assembled according to
the following instructions.
Adjust the height of the main unit, and the
distance from main unit to the support
holder by rotating the locking device.
Anti-drop protector can be adjusted up or
down,
suitable for fixing the main unit, and then
attach the main unit to the stand.
b. Install stirring impeller
Plug the stirring impeller into the drill
chuck, and adjust the depth of stirring
impeller into vessel. Rotate the drill chuck
with your fingers to fix the stirring impeller,
and then clockwise tighten evenly the drill
chuck using chuck key.
LED Displays speed value under
normal conditions.
Display area
LED Displays warning code under
abnormal conditions
ensure the locking
Figure 2
Table 4
position is
6
Figure 1
Figure 2
Figure 3