Service And Repair; Electrical Schematics - RIDGID KT-190 Manual Del Usuario

Model KT-190 and KT-200 Pipe Thawing Units

Service and Repair

WARNING
Service and repair work on this tool must be performed by
qualified repair personnel. Thawing unit should be taken
to a RIDGID Independent Authorized Service Center or re-
turned to the factory. All repairs made by Ridge service
facilities are warranted against defects in material and
workmanship.

Electrical Schematics

KT-190 Thawer
115V/60Hz
KT-200 Thawer
115V/60Hz
10
When servicing this tool, only identical replacement parts
should be used. Failure to follow these instructions may
create a risk of electrical shock or other serious injury.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool Com-
pany at (800) 519-3456 or http://www.ridgid.com
Ridge Tool Company
OUTPUT
TERMINALS
OUTPUT
TERMINALS