Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Model KT-190 and KT-200 Pipe Thawing Units
• Use only accessories that are recommended by the
manufacturer for your tool. Accessories that may be
suitable for one tool may become hazardous when
used on another tool.
• Inspect tool and extension cords periodically and
replace if damaged. Damaged cords increase the risk
of electrical shock.
• Keep handles dry and clean; free from oil and
grease. Allows for better control of the tool.
• Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing the unit. These preventative safety measures
reduce the risk of accidentally starting the unit.
Service
• Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified repair personnel could result in injury.
• When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
Section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of electrical shock or injury.
• Disconnect all power from the unit before servic-
ing. Eliminates the risk of electrical shock and
accidental starting.
Specific Safety Information
WARNING
Read this operator's manual carefully before using
the Pipe Thawing Tools. Failure to understand and
follow the contents of this manual may result in
electrical shock, fire and/or serious personal injury.
Call the Ridge Tool Company, Technical Service Depart-
ment at (800) 519-3456 if you have any questions.
Tool Safety
• Tool is made to thaw frozen iron or copper water
pipes. Follow the instructions on proper use. Other
uses may increase the risk of injury.
• Do not leave the unit unattended while thawing.
Such preventive measures reduce the risk of injury or
fire.
• Do not touch the clamp tips or cable connections.
Reduces the risk of burns.
• Do not operate unit with housing removed.
Exposure to internal parts may result in injury.
• Make both pipe connections before plugging in
unit. Prevents electrical arcing between the clamps and
the pipe.
• Use cable and clamps provided with unit. Incorrect
cables may result in overheating of the wires.
• Keep clamps away from combustible materials or
articles that can be damaged by heat. Clamp tips be-
come hot during use.
Description and Specifications:
Description
The RIDGID Pipe Thawing Machines are easy-to-use,
and versatile for thawing
pipe up to 150 feet (KT-200). Both the KT-190 and KT-200
use low voltage and high amperage to quickly thaw frozen
tap water lines and frozen heating systems.
This method does not require that you know exactly
where the frozen section is nor do you have to have direct
access to the area. The KT-190 and KT-200 will thaw cop-
per or steel pipe that is underground, beneath the floor or
behind walls. Multiple voltage settings on the KT-200
allow for maximum amperage to provide the shortest
thawing time. Vinyl coated clamps with 25 foot cables,
standard with both units, permit thawing of a 50' section of
pipe. Additional 25' cable extensions are available for
longer runs.
Specifications
Line Capacity:
Primarily recommended for all indoor copper or steel
pipes from
plastic pipe or lines containing plastic or rubber couplings.
Thawing Unit:
Input ..............................115 Volts, 15 Amps
Output............................6.0 Volts
Output............................300 Amps 300 Amps
Minimum Reach ............15'
Maximum Reach ..........75'
Weight ..........................25 lbs
Weight ..........................11.4 kgs
Ridge Tool Company
" to 1
" copper or steel/iron
1
/
1
/
2
2
" to 1
". Thawing units will not work with
1
/
1
/
2
2
KT-190
KT-200
4.5 - 7.6 Volts
4'
150'
29 lbs
13.2 kgs
3
Publicidad
Capítulos
Tabla de contenido
