Worx HYDROSHOT WG629 Manual De Instrucciones página 12

ACCESSORIES
WG629 WG629.1 WG629.2 WG629.9
Hose 20ft.(6m) 1
Short lance 1
Extension
1
lance
Multi-Spray
1
nozzle
Carry bag 1
Battery pack
1
(WA3575)
Charger
1
(WA3742)
Window
squeegee with
water sprayer
(WA4050)
Brush
(WA4048)
Soap bottle
(WA4036)
Bottle cap
(WA4038)
12
Only use the appropriate accessories intended for
this tool. Accessory information can be found on
the product packaging, at a WORX dealer or on our
website at www.worx.com.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY & OPERATION
ACTION
BEFORE OPERATION
Installing the battery pack
Removing the battery pack
Charging the battery pack
More details can be found in WA3742's
manual
ASSEMBLY
20V Max Lithium Portable Power Cleaner
1 1
1 1
1 1
1 1
1 1
1 1
1 1
/ 1 /
/ 1 /
/ 1 /
/ 1 1
See Fig. A1
See Fig. A2
See Fig. A3
NOTE: The power nozzle has two
working modes: short lance only
and short lance used together with
extension lance.
1
Working mode 1
1
Attaching short lance to the power
nozzle
1
NOTE: When attaching, align the
two projections on the lance with the
grooves of the power nozzle as shown
1
in Fig. B.
NOTE: In this working mode, the
1
highest pressure is 94psi. it is suitable
for light duty cleaning and watering.
/
Attaching the Multi-spray nozzle
NOTE: When attaching, rotating the
/
nozzle left and right to make sure the
nozzle fully seated into position and
gently pulling it to make sure it is
/
locked into position securely.
Working mode 2
Attaching extension lance to the power
/
nozzle
Attaching short lance to the extension
lance
/
NOTE: When attaching, align the
two projections on the lance with the
/
grooves of the power nozzle as shown
in Fig. D, E.
NOTE: In this working mode, the
highest pressure is 320psi. it is suitable
for removing strong stains.
Attaching the hose to the power nozzle
NOTE: After the hose is attached, check
the connection by gently pulling upon
the hose. It should not be pulled off.
Attaching your own water hose
(optional)
1. Remove the hose adapter
2. Attach the home garden hose with
suitable connectors
NOTE: Except for the hose supplied,
FIGURE
you can also connect the power nozzle
to your own water hose with suitable
connectors.
NOTE: Check whether the filter screen
is missing before retightening the hose
adapter. When retightening the quick
hose adapter, please tighten securely.
Otherwise, it may not draw any water
for proper operation.
OPERATION
Pressure setting
Your power nozzle has two pressure
modes.
See Fig. B
See Fig. C
See Fig.
D, E
See Fig.
F1, F2
See Fig.
G1, G2, G3
See Fig. H
EN