Leviton Door Station Manual De Instrucciones página 13

9. To set the local Time Zone, Time, and NTP Server on the door station, select
System from the main menu, and then select Time from the context menu.
a. To select the local time zone where the door station is installed, click on the drop-down
menu next to Time Zone and select the GTM Time Zone from the list.
b. Enter the current Date and Time in the edit box next to Time in the following format
(YYYY/MM/DD hh:mm) or click the Get Local Computer Time to populate the box with
the time of the local PC.
c. To enable/disable the door station from acquiring the local time from an NTP Server,
select On/Off from the drop-down menu next to NTP Server. If enabled, enter the URL
for the NTP Server in the edit box. By default, NTP Server is set to On and the "time.nist.
gov" time server is used.
d. To select the time interval in which the door station will sync its time with the NTP Server,
enter the number of seconds in the edit box next to SYNC Interval. The default setting is
604800 seconds (i.e. 7 days).
e. When complete, click Save.
10. To update firmware in the door station, select System from the main menu, and then select
Upgrade from the context menu.
a. If a firmware update is available, obtain the firmware file from Leviton and save it to the PC.
b. Click the Browse button to open Windows Explorer.
c. Browse to the location of the firmware file, select it, and then click Open.
P11