Leviton Door Station Manual De Instrucciones página 16

COMPLETING THE CONFIGURATION IN LEVITON PC ACCESS SOFTWARE
When the configuration of the door station has been completed, reopen Leviton PC Access
and complete the configuration which gets written to the controller. Using Leviton PC Access
Software, under Extended Setup, click on SIP Stations.
1. In the edit box under SIP Station Name, enter the name of the door station as it will be
displayed on the touchscreen. This name should match the name that is entered next to
Display Name for door station.
2. In the edit box under Address, enter the IP Address of the door station.
3. In the edit box under SIP User, enter the Phone Number that was assigned to the door
station.
4. The Activate Switch setting is used to show or hide the Activate button (the button used
to activate the relay on the door station) while on an intercom call with the door station
using the OmniTouch 7 touchscreen. To display the Activate button, using the drop-down
menu, set Activate Switch to 1. To hide the Activate button, using the drop-down menu,
set Activate Switch to 0.
5. The Activate Seconds setting sets the amount of time (in seconds) the relay will remain
engaged when the Activate button is pressed on the OmniTouch 7 touchscreen. Using the
drop-down menu, select a time from 1 to 60 seconds.
6. In the edit box under Connection User, enter the Administrator username or the Account
username for one of the Users. The Administrator username and Password or one of
the Account usernames and Password must be used to activate the relay or view the
camera on the door station.
7. In the edit box under Connection Password, enter the Administrator password or the
Account password, which matches the input for the Connection User. The Administrator
username and Password or one of the Account usernames and Password must be used
to activate the relay or view the camera on the door station.
P14