Leviton Door Station Manual De Instrucciones página 6

6) Place the door station on top of the metal backbox. While holding the door station in place,
screw the 4 supplied screws into the openings on the top and bottom of the door station
(Figure 3). Make sure the screws attach into the slots on the plastic backbox. Gently tighten
the screws until the door station is securely fastened to the backbox. Do not over tighten the
screws.
7) Insert the top and bottom overlays into the respective mounting holes until they snap in
place (Figure 4).
P4
Figure 3
Figure 4