Manual Out Of Range Function; Dual Watch - Midland G9 Manual De Uso

To confirm press PTT or wait for 5 seconds.
3.
Important: be sure that the Emergency function is active! (EMG blinking).
If you decide to change the channel dedicated to the Emergency function,
do not forget to make the same change to all the radios!
To set again the original Emergency channel (P8 DCS 50)
1. Press the MENU button until the display shows EC on.
2. Push MENU again and select of
3. To confirm press PTT or wait for 5 seconds.
If you dedicate any of the standard channels to the Emergency function,
remember to use it only for this purpose, otherwise you will cause inter-
ferences.

Manual Out of range function

This function allows you to know if there are any radios within your range.
By pushing EMG twice, you will send a request of acknowledge to the
other G9 Plus operating within your range and tuned on the same chan-
nel. If any radio replies, it means that it's within your range and you will
receive an audio tone for confirmation.
This function can be used only if the "Automatic Out of Range" feature is
not active.

Dual Watch

The Dual Watch allows you to monitor constantly two channels of your
choice at the same time.
Enabling - Disabling
Press the MENU button until the display shows DW of.
1.
Select the second channel to monitor by pushing ▲▼.
2.
To confirm your selection, press PTT or wait for 5 seconds.
3.
4. The display will alternately show the channel in use and the second
channel to monitor.
To stop the function, simply press MENU.
5.
When the transceiver detects a transmission on one of the two channels,
the Dual Watch temporarily pauses, remains tuned for 5 seconds on the
corresponding channel, giving the user a chance to respond to a CALL.
20 | Midland G9/G9E Plus instruction guide