Features Of The Programs - Bticino LIGHT TECH L4448 Instrucciones De Empleo

Features of the programs

Program MAN
The device works as a traditional ambient thermostat; setting the reference
temperature the thermostat switches on or off the controlled load keeping
the ambient temperature about the chosen value
Program P1
Time and day settings are already programmed, and cannot be modified;
see the following table. It is only necessary to set the reference
temperatures (Tmin and Tmax).
Program P2
This program has the same features as P1, but with different time and
day settings, see following table.
Program P3
It is possible to customize, the time and day settings; programm the
values of the reference temperatures (Tmin and Tmax).
Moreover it is possible to activate the frost protection (indicated with
) which keeps the ambient temperature over 7°C.
100
NOTE
To program Tmin or Tmax means that starting from the programmed
time the thermostat operates so that the ambient assumes the
programmed reference temperature value.
P1
1° 2° 3°
day time 23.00-5.30 5.30-8.30 8.30-11.30 11.30-14.30 14.30-17.00 17.00-23.00
1÷5 temp. T min T max T min
day time 23.00-7.00 7.00-10.00 10.00-12.00 12.00-16.00 16.00-18.00 18.00-23.00
6-7 temp. T min T max T min
P2
1° 2° 3°
day time 23.00-7.00 7.00-10.00 10.00-12.00 12.00-16.00 16.00-18.00 18.00-23.00
1÷7 temp. T min T max T min
4° 5° 6°
T max T min T max
T max T min T max
4° 5° 6°
T max T min T max
101