Manual Operation - Bticino LIGHT TECH L4448 Instrucciones De Empleo

Manual operation

Tmin
DAY 1
Tmax
With the programs P1-P2-P3 it is possible
1
to operate manually the thermostat without
P3 16
changing the programming.
P + - M S
- the key + activates the programmed
reference value Tmax.
- the key - activates the programmed
reference value Tmin.
The manual command lasts till the next
programmed operation occurs.
NOTE
When the frost protection is activated, it is
not possible to use the manual operation.
122
NOTE 2
For best comfort, the chronothermostat
makes up for the unavoidable slowness in
heating the room.
When a decrease in temperature is
detected, the heating system is turned on
before temperature drops below the set
level.
For this reason, it is possible that the
heating system is turned on, for short
periods of time, even if the measured tem-
perature is higher than the set one.
123