Delete (Reset); Programming - Bticino LIGHT TECH L4448 Instrucciones De Empleo

Delete (Reset)

DAY 1
Upon installation, before entering any setting,
1
reset by pressing P and M at the same time.
P1 16
The chronothermostat must be reset every time
P + - M S
!
it doesn't start to work properly when turned on
after a long period of time during which it in not
energized.
!
Resetting cancels all previous settings.

Programming

DAY 1
Selection of the program
1
The four programs to be set: MAN, P1, P2
MAN P3 COPY PRG 16
P3 appear subsequently pressing the key
P + - M S
S.
104
Functions applying to all programs
Pressing P gives access to the
programming.
The sequence of the program steps
appears pressing S.
Enter or modify the different values pressing
the keys - or +.
By pressing the key M the set data is
stored, and the program advances
automatically to the next step.
Attention: the programming is automatically
annulled if the keys are not operated within
30".
If P is pressed during the programming, the
thermostat returns to normal operating
conditions.
105