User Parameters - Adam MDW-300L Serie Manual Del Usuario

7.0 USER PARAMETERS

This indicator has 4 parameter settings that can be selected.
When the scale is in normal weighing mode, press and hold down the [ON / OFF] key
1.
and the [UNIT] key for 3 seconds until 'Setup' is shown on the display.
When in the SETUP mode, press the [Print/Hold] key to change the flashing digits, and
2.
[TARE] key to confirm the flashing digits and move to the next parameter setting. Press
the [ON / OFF] key to exit the set up mode.
Parameters setting summary:
3.
Parameter x/xy
A.o.t. 00-15
P.H. 0,1,2
H.t 0-4
S.F. 0-3
Factory Set
Auto-off time:
05 No auto-off = 00.
01-15 minutes auto-off time.
0 = Only Print Function
1 = Only Hold Function
2 = both HOLD and PRINT function (pressed
1
dow n less 3s,this key w orks as Print
function; pressed dow n more than
3s,this key w orks as HOLD function)
Hold time:
0 = no time limit.
1 = 10 seconds
0
2 = 30 seconds
3 = 60 seconds
4 = 120 seconds
0 = No RS232 Function.
1 = Continuously outputs display data.
2 = Output display data w hen PRINT pressed
0
3 = Bi-directional communication (the scale
receives and executes commands from the
HOST device)
Page 10
Setting