Function; Weighing - Adam MDW-300L Serie Manual Del Usuario

5.0 FUNCTION

5.1

WEIGHING

• Place the Scale on an even floor and press the [On/Off] key.
• The instrument performs a self-test after which it is ready for operation.
• Press the [On/Off] key and the machine switches off.
• The person to be weighed can step on to the platform once the scale shows
0.0 on the display. The weight will be display in Kg. or lb. depending on the
units chosen by the user.
• If the weighing value is to be tared press the tare key to remove the weight
value from the display.
• Press the [Units] key for changing the weighing unit to kg or lb. The LED will
indicate the chosen weighing unit.
• Overload display: When "
on the platform is over the maximum capacity. Under these circumstances, it
is necessary to reduce the load otherwise the sensor or the platform will be
damaged.
• Hold Function: To lock the weighing result, press the [Print/Hold] key. The
LED will flash until a stable reading has been obtained and then it will light up
constantly. The weight will be displayed until the hold time has expired (see
Sec 7.0) or to manually release the function, press the [Print/Hold] key again.
• Print Function: To send the w eighing result to a print er or computer press
the [Print/Hold] key when the [Print/Hold] key has been set up in the
parameter section to work as print function.
FULL
" appears on the display, it shows that the load
Page 7