Macros; Setting Up More Devices; Setting Up More Favourites - Emtec H510 Manual De Instrucciones

Sleep, cont.
Pressing OK takes you back to the Home screen with your sleep timers
saved. The next time you select the Sleep screen you'll see that the
sleep timers have started to count down.
Make sure you leave the remote pointing at the device(s) you've
set Sleep Timers for so it can send the Power command to the
device(s) at the time(s) you've set.

Macros

The Macros allow storing sequences of commands. You can program
and store up to 27 sequences of successive keystrokes for several keys
of your choice. By pressing one the respective Macro key already
programmed, this sequence of successive keystrokes (IR commands) is
sent. Any sequence of successive keystrokes performed frequently may
be reduced to only 2 commands (MACRO side key from the Home
Menu and then the choosen macro) .
For example, by pressing MACRO and then the choosen Macro, you
can turn on your TV set, display your favourite channel, turn on your
DVD recorder and start a recording, etc.
You can store a sequence of 99 commands for each Macro.
If no macro were programmed, the remote control will invite you to set
up one (See page 16)

Setting up more Devices

When you first inserted the batteries in the remote you likely went
through the Wizard and set up a few devices. Here's how to set up
more devices. Press the HOME key to display the Home screen. Then
press the Side Key next to Setup. Then press the Side Key next to
Devices.
Then pick a device you want to set up. Note, it doesn't have to be a
device that is grayed out. You can also select any device that's already
set up (not grayed out) and change its settings. From this point, setting
up a device is the same as you learned in the Wizard. See pages 7 and
8. Note, you can select Aux 1 or Aux 2 from the Devices screen and
then select any type of device to set up under either Aux key.
Or you could select any device, and then press Change Type repeatedly,
on screen (1) above, to scroll through the devices and change to TV
12
(for example) to set up a second TV. Selecting Label, on screen (2) lets
you rename the device, e.g. you could call it Den TV, and have another
called Liv Rm TV.
Note: "Triple tap" name entry works in a similar fashion to text entry
on a cell phone. Tap each numeric key to cycle through ALL caps,
numbers, and lower case letters. So at screen (3) you could press the 6
key to enter M, then the 9 key 8 times for a lower case y, then the zero
key twice for a space, then the 8 key for T, then the 8 key three times
for a V, to enter My TV. See pages 9, and 17 for more details on entering
text to change labels.

Setting up more Favourites

Setting up more Favourites
When you first inserted the batteries in the remote you likely went
through the Wizard and set up a few favourites. You could only set up
10 favourites at that time. Here's how to set up more favourites. Press
the HOME key to display the Home screen. Then press the Side Key
next to Setup.
Then press the Side Key next to Favourites.
Then press the Side Key next to Wizard.
Then pick the group that you want to set up favourites in, (or add
(1)
more favourites to). If you pick an existing group that you previously
set up favourites in, say
ones you already set up. If you already set up 10 favourites a new
page will be added (you can have 10 pages of favourites).
Groups that have not yet had any favourites added to them are grayed
out, but can still be selected. From this point adding favourites is the
same as you learned in the Wizard, so follow the directions on the
screen (see also pages 8-10).
, any new favourites will be added to the
13
(2)
(3)