Publicidad
VÍDEOPORTERO 2 HILOS KIT - 2-WIRE KIT VIDEODOOR ENTRY SYSTEMS - VIDÉOPORTIER 2 FILS KIT
SOPORTE DE CONEXIONES - CONNECTION BRACKET - SUPPORT DE CONNEXIONS
RECOMENDACIONES - RECOMMENDATIONS - RECOMMANDATIONS
When deciding where to position the connection support, choose an area of wall which is smooth, even and hard. Bear in mind the
dimensions of the monitor which will later be connected to the connection bracket. If the bracket is fixed to a standard electrical box,
make sure that this is properly aligned with the wall. By doing so, you will ensure that the monitor is firmly held in place.
Avoid places where there are sources of direct light, thereby preventing undesired reflections on the screen of the monitor. Similarly,
avoid sources of strong heat, damp or steam, which could reduce the operational life of the equipment.
1
Fix the connection bracket to the
wall with the plugs and screws
provided. It is recommended that
you use the fixation points in the 4
corners. Position the bracket
vertically so that its top part is 1.6m
above floor level.
Monitor and connection bracket size
Publicidad
