RCA DTA800 Manual De Usario página 5

Option 2: Your TV has AudioNideo jacks (red. white
Option 3: You also need to connect your VCR
DTA800.B
f1\
Connect your existing antenna cable to the
\..V
ANTENNA IN jack of the Converter
t::\
AC120V
Connect the AudioNideo
o
60Hz
from the AudioNideo
white, red) of the Converter Box to the
AudioNideo
If there are more than two sets of Audio!
Video jacks on the
either AV1 or AV2 input jacks to those of
the Converter
f3\
Connect the AC power
\V
Converter
f1\
Connect your existing antenna cable to the
\..V
ANTENNA IN jack of the Converter
f2\
Connect the RF coaxial cable* (supplied) from
\V
the OUTPUT TO lV jack of the Converter Box
to the ANTENNA IN jack of the VCR.
f3\
AC120V
Connect an RF coaxial cable* (not supplied)
60Hz
\V
from the ANTENNA OUT jack of the VCR to
the ANTENNA IN jack of the
f4\
Slide the CH3!CH4 selector on the back of
~ the VCR to the channel that is not in use in
your area. The VCR will send its video signal
to Channel 3 or 4 on your lV.
f5\
Slide the CH3!CH4 selector on the back of
\V
the Converter
VCR is not using; e'-g., if you set the VCR
selector to CH3, slide the Converter
selector to CH4.
f6\
Connect the AC power cable of the
~ Converter
* You can also use AudioNideo
(similar to option
jacks are available
yellow connectors)
&
cables (not supplied)
OUT jacks (yellow,
lV
IN jacks on the set.
lV
set, connect
Box.
cable of the
Box to a suitable wall outlet.
lV
Box to the channel that the
Box to a suitable wall outlet.
2) if the connection
on the VCR and lV.
Box.
only
Box.
set.
Box
cables
5