Safety Precautions - Sears Craftsman 320.10870 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

_WARNING:
BE SURE to read and understand all Instructions
in this
manual before using this circular
saw. Failure to follow all instructions may
result In hazardous radiation exposure, electric shock, fire and/or serious
personal Injury.
SAFETY PRECAUTIONS
FOR LASERS
This circular saw has a buift-in laser light. The laser is a Class tile and emits output power
of a maximum 1roW and 635-665nm wavelengths. These lasers do not normally present
an optical hazard. However, DO NOT stare at the beam as this can cause flash blindness.
The following label is on your tool,
It indicates where the saw emits the
laser light, BE AWARE of the laser light
location when using. ALWAYS MAKE
SURE that any bystanders In the vlclnlty
of use are made aware of the dangers
of looking directly Into the laser.
G3_;,665nm O_dp_t: _;2 _;_W Cl.sl; ilia L_ser Pr_dgct
temples w_th 21 CFR par_ I040,10
end 1040
11
AVOID EXPOSURE
Laser radiation is emitted through this aperture
/_WARNING:
LASER LIGHT, LASER RADIATION. Avoid Direct Eye
Exposure. DO NOT stare Into beam. Only turn laser beam on when the saw
Is on the workplece.
Class ilia laser,
i.......................
z_WARNING:
Use of controls, adjustments or performance
of
procedures other than those specified in this manual may result In hazardous
radiation exposure.
_WARNING:
The use of optical Instruments such as, but not limited to,
telescopes
or transits to view the laser beam will Increase eye hazard,
1. DO NOT remove or deface any product labels. Removing product labels
Increases the risk of exposure to laser radiation,
2. The laser beam can be harmful to the eyes. ALWAYS avoid direct eye exposure.
DO NOT look directly into the laser beam output aperture during operation. DO NOT
project the laser beam directly into the eyes of others, Turn laser on ONLY when
making cuts.
3. Laser enhancing safety glasses are included to enhance the laser beam in bright
light conditions° DO NOT wear these glasses if they interfere with the safe operation
of this saw,,
4. The laser on the circular saw is not a toy. ALWAYS keep out of the reach of
children. The laser light emltted from this device SHOULD NEVER be directed
towards any person for any reason.
5. BE SURE the laser beam is aimed at a workpiece
(such as wood or rough
coated surfaces) that does not have a reflective surface°

Publicidad

Tabla de contenido
loading

Tabla de contenido