English
‧ Only carry out the work described in these instructions.
‧ Only use original spare parts and accessories for the appliance.
‧ The appliance should be protected by a residual current protection
device with a maximum rated residual current of 30 mA. Please
contact an electrician if there are any questions or problems.
‧ In the event of water leakage or when the residual current protec-
tion device is triggered, immediately disconnect all devices in the
aquarium from the power supply.
‧ If they are not being used, always disconnect all devices in the
aquarium from the power supply before you install/remove any parts
and before all cleaning and maintenance work.
‧ Protect the mains socket and mains plug against mois-
ture and wetness. A drip loop must be formed with the
mains cable. This prevents any water running along the
cable to the mains socket, which would result in a
short-circuit.
‧ The electrical data of the appliance must match the data of the
power mains. This data is found on the type plate, the packaging
and in these instructions.
19