English
7. Clearing faults
DANGER! Electrocution!
▶ Before clearing faults, remove the mains plug.
Faults
Pump does not start
Pump does not pump
Pump not pumping sufficiently
For other faults, please contact EHEIM Service.
8. Decommissioning and disposal
Storage
1. Take the appliance out of the aquarium.
2. Clean the appliance
3. Store the appliance in a frost-proof place.
Disposal
When disposing of the appliance, heed the respective statutory regulations. Information on the disposal of electrical and elec-
tronic appliances in the European Union:
Within the European Union, disposal of electrically operated appliances is governed by national regulations that are based on
the EU Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). The appliance may no longer be disposed
of with the municipal or household waste. The appliance will be accepted free of charge at municipal collection points or
recycling centres. The product packaging is made up of recyclable materials. Dispose of them in an environmentally responsible
manner and take them for recycling.
Possible cause
No mains voltage
Mains plug is not inserted
Impeller is blocked
Thermal cut-out has activated
Power controller is dirty
22
Remedy
▶ Check the mains
voltage
▶ Check the supply line
▶ Insert the mains plug in the mains
socket
▶ Clean the pump
1. Remove the mains plug and let the
pump cool down.
2. Insert the mains plug again after
approx. one hour.
▶ Clean the power controller