Declaration Of Conformity - Bosch PSB 650 RE Manual Original

OBJ_BUCH-911-009.book Page 17 Thursday, October 23, 2014 10:52 AM
Vibration total values a (triax vector sum) and uncertainty K determined according
h
to EN 60745:
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving without impact:
a
h
K
Tapping:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-1.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 13.10.2014
Bosch Power Tools
PSB 650 RE
PSB 680 RE
PSB 6500 RE
PSB 6200 RE
PSB 650 RA
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
Assembly
 Before any work on the machine itself, pull the mains
plug.
Dust Extraction (PSB 650 RA/PSB 750 RCA)
(see figures A–F)
 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system suitable
for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the mate-
rials to be worked.
 Prevent dust accumulation at the workplace. Dusts can
easily ignite.
 Use the dust/chip extraction only when working con-
crete, brick and brickwork. Wood or plastic chips can
easily lead to clogging.
 WARNING Fire hazard! Do not work metallic materials
with the extraction device mounted. Hot metal chips can
ignite parts of the extraction device.
English | 17
PSB 750 RCE
PSB 7500 RCE
PSB 750 RCA
4.5 5.0
1.5 1.5
35 35
3.5 4.5
<2.5 <2.5
1.5 1.5
<2.5 <2.5
1.5 1.5
1 609 92A 0TN | (23.10.14)