Taurus Megane 3G Eco Turbo Manual Del Usuario página 16

Vacuuming function:
- Fit the hose unit to the vacuum
cleaner's air intake.
- To disconnect the hose unit from
the vacuum cleaner, press the two
buttons on the hose joint at the same
time and pull outwards (Fig. 1)
Insertion of accessories into the
appliance's grip:
- The appliance's grip is designed in
such a way that it allows the insertion
of the following accessories:
- Extendable extension tube: Desig-
ned to provide access to surfaces
which are out of reach and make floor
cleaning comfortable, its length can
be adjusted by using the adjustment
control.
- Vacuum cleaner base: Specially
designed for cleaning floors (both
rugs, carpets and hard floors), its
base has a retractable brush that can
be adjusted to two heights for greater
efficiency on these floors.
It is advisable to have the brush out
for hard floors and the brush in for
rugs and carpets.
- Vacuum cleaner base for delicate
floors: Specially designed for deli-
cate floors, such as parquet wooden
flooring.
- Lance: Specially designed for get-
ting into cracks and difficult corners.
- Multi-use brush (built into the
lance):
- Upholstery brush: Especially suita-
ble for cleaning textile surfaces.
Use:
- Take the length of cable required
out of the housing.
Manual Megane 3G.indb 16
- Connect the appliance to the mains.
- Turn the appliance on using the on/
off switch.
- Select the desired speed.
Electronic power control:
- The power of the appliance can be
regulated by using the power regula-
tor control. This function is very use-
ful, as it makes it possible to adapt
the power of the appliance to the type
of work that needs to be done.
Once you have finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Unplug the appliance to the mains.
- Retract the cable by pressing the
roller cable button and guide the
cable into the appliance.
- Clean the appliance.
Cord housing
This appliance has a cable com-
partment situated on its posterior.
Carry handle/s:
- The device has a handle on the
upper part so it can be transported
easily and comfortably (Fig. 2).
Parking position:
- This appliance has two parking
positions for comfortable and
straightforward storage.
- To make use of the vertical parking
put the appliance in a vertical
position (so that the back part of the
appliance is now leaning against the
floor) secure the hook of the head to
the hook which can be found on the
lower part of the appliance (Fig. 3)
18/07/12 12:56