Picture In Picture; Memory Location; Adjusting Reticle - Liemke SPERBER-25 Manual De Instrucciones

12. PICTURE IN PICTURE

When this menu item is activated, a second window is displayed
in the upper section of the display, which shows the center of the
field of view (with reticle) in double digital magnification.

13. MEMORY LOCATION

On top of the screen the currently selected memory location of
the reticle data is displayed. Up to 4 groups of reticle data can be
saved. (G1, G2, G3 or G4). In the submenu you can change the
memory locations).

14. ADJUSTING RETICLE

The digital reticle is adjusted via this menu item.
> Choose between elevation and windage adjustment by pres-
sing the M button.
> Use the Power- and the C-buttons (arrow symbols) to move the
auxiliary reticle in the desired direction.
The adjustment is displayed in centimeter values at the top and
right. Pressing the button shifts the auxiliary reticle by one pixel
width, a longer press by 10 pixel widths.
> To adjust the reticle, move the auxiliary reticle in the direction of
the point of impact to be corrected. If the meeting point is e.g.
to the left of the target point, correct the auxiliary reticle accor-
dingly to the left (the screen moves to the right).
> The values are saved by pressing the M-button for 3 seconds.
SPERBER-25/-35 · Operating Manual 12 / 2020
E
N
18
–
19