Craftsman 351.211930 Manual De Usuario página 2

Warranty .................................................... 2
Safety Rules ........................................ 2
Unpacking ............................................... 4
Assembly ................................................... 4
Installation .................................................. 4-5
Operation ................................................ 5-6
Maintenance .......................................... 6
Troubleshooting ............................................. 7
Parts lllustration and List ............................ 8-I I
Espaffoi .............................................................. 12-17
ONE-YEAR FULL WARRANTY ON
CRAFTSMAN PROFESSIONAL TOOL
If this Craftsman tool fails due to a defect in material or
workmanship within one year from the date of purchase,
call 1-800-4-MY-HOME® TO ARRANGE FOR FREE
REPAIR
(or replacement if repair proves impossible).,
This warranty
does not include
expendable parts,
such
as
lamps,
batteries or
grinding
and wire wheels
If this toot is ever used for commercial or rental purposes,
this warranty will apply for only 90 days
from the date of
purchase..
This warranty gives you specific legal rights
and you may
also have other
rights
which vary from state to state.
Sears,
Roebuck and
Co,, Hoffman Estates,
IL 60179
WARNING:
Some dust created by power sanding, sawing,
grinding, drilling and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm
Some examples of these chemicals are:
- Lead from lead-based paints
,= Crystalline silica from bricks and cement and other
masonry products..
- Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures vary, depending on how often
you do this type of work To reduce your exposure to these
chemicals: work in a well ventilated area and work with
approved safety equipment Always wear OSHNNIOSH
approved, properly fitting face mask or respirator when using
such tools
WARNING: For your own safety, read all of the instructions
and precautions before operating tool..
CAUTION: Always follow proper operating procedures as
defined in this manual even if you are familiar with use of this
or similar tools Remember that being careless for even a
fraction of a second can result in severe personal injury
BE PREPARED FOR JOB
• Wear proper apparel,, Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine
• Wear protective hair covering to contain long hair.
• Wear safety shoes with non-slip soles.
,, Wear safety glasses complying with United States ANSi
Z87..1. Everyday glasses have only impact resistant lenses
They are NOT safety glasses.
= Wear Face mask or dust mask if operation is dusty
• Be alert and think clearly Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness..
PREPARE WORK AREA FOR JOB
,, Keep work area clean Cluttered work areas invite
accidents_
• Do not use power tools in dangerous environments.. Do not
use power tools in damp or wet locations Do not expose
power tools to rain..
• Work area should be properly lighted_
,, Proper electrical receptacle should be available for toot..
Three prong plug should be plugged directly into properly
grounded, three-prong receptacle.
• Extension cords should have a grounding prong and the three
wires of the extension cord should be of the correct gauge
• Keep visitors at a safe distance from work area..
- Keep children out of workplace. Make workshop childproof
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
= Always unplug tool prior to inspecfion_
• Consult manual for specific maintaining and adjusting
procedures.r
- Keep tool lubricated and clean for safest operation..
,, Remove adjusting tools Form habit of checking to see that
adjusting tools are removed before switching machine on.
• Keep all parts in working order Check to determine that the
guard or other parts will operate properly and perform their
intended function.
• Check for damaged parts Check for alignment of moving
parts, binding, breakage, mounting and any other condition
that may affect a tool's operation
. A guard or other part that is damaged should be properly
repaired or replaced° Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
KNOW HOW TO USE TOOL
. Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
. Disconnect tool when changing grinding wheels..
• Avoid accidental start-up. Make sure that the tool is in the
"off" position before plugging in.
• Do not force tool. It wilt work most efficiently at the rate for
which it was designed
• Keep hands away from moving parts and grinding surfaces.
• Never leave tool running unattended Turn the power off
and do not leave tool until it comes to a complete stop.
• Do not overreach.. Keep proper footing and balance.
• Never stand on tool Serious injury could occur if tool is
tipped oVerr.
• Know your tool.. Learn the tool's operation, application and
specific limitations
© Sears, Roebuck and Co
2