3. Installation
3.4 SIM card
(mini SIM format + voice and text message package)
TYDOM 2.0 is connected to a GSM telephone network.
If a problem is detected, a text message is sent to the numbers in the contact list.
GSM network
GSM communications require a subscription to be taken out with an operator.
Advice before taking out your subscription:
- Enquire about your operator's network coverage for your installation.
- To prevent any interruption in the GSM network due to the expiry of a pay-as-you go or limited pack-
age SIM card, we do not recommend this type of card.
Your installation has a touch screen
keypad (CLT 8000 TYXAL+)
We recommend that you configure your SIM card
from the touch screen keypad.
To do this, follow the TYDOM 2.0 activation steps
then access the configuration menu of the SIM card
(see § 5.6 'Configuring the SIM card' of this guide).
3.5 Mount TYDOM 2.0
Select one of the 2 cable outlets marked
1 and 2 on the rear panel.
SIM card
Enter PIN code
Enter PUK code
Back
Ok
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
2
44
Your installation does not have
a touch screen keypad
(CLT 8000 TYXAL+)
In this case, disable the PIN code of
your SIM card using a mobile phone,
before installing it into TYDOM 2.0.
1