DHTP1 Amplifi ed Touch Pad Controller
DHTP1 Rear
Cat-5
-
+
L+ L- R+ R-
SPEAKERS
PWR IN
DH46X
Figure 3.2: DH46X to DHTP1 Connection
AUX Power Connections
For wire runs over 150' it is recommended to run an
additional 16 AWG/2 conductor wire from the head-
end location to the Touch Pad locations. This will
allow the AUX POWER OUT terminals to supply addi-
tional power to the Touch Pad to compensate for the
additional distance. The maximum wire run distance
using Cat-5 and 16 AWG 2 conductor is 600'. Make
all connections between the DH44 or DH46X and the
DHTP1 Amplifi ed Touch Pad as previously described,
then make the aux. power connections described on
Page 13 and illustrated in Figure 3.3.
12
©2007 • All rights reserved.