Whole House Music (Whm) - ATON DHTP1 Manual Del Usario

Whole House Music Mode (WHM)
Whole House Music Mode links all zones to share
source selection functionality so that the whole
house listens to the same source. Any Touch Pad in
any zone can initiate WHM mode. Volume, Mute and
Tone settings remain independent for each zone, but
the source selection remains linked. When WHM is
deactivated (from any Touch Pad in the system) all
zones remain on at current volume levels and source
selection, but are unlinked and regain independent
source selection capabilities. See Figure 4.6 for
details.
All Touch Pads are defaulted to being included in
WHM mode. See "Do Not Disturb" for instruc-
tions on how to disable this functionality in a
particular zone.
To enable/disable WHM Mode:
1. Press and hold the area indicated
seconds.
2. Select the desired source
the selected source (turning On if they were
Off) at the previous Volume levels*. If a zone was
previously On, the Volume will remain at the exist
ing level. The Source LED
WHM source will flash slowly.
3. To exit WHM mode, press the indicated area
for 3 seconds. All zones will remain On at their
32
DHTP1 Amplifi ed Touch Pad Controller
. All zones will play
2
3 for the selected
©2007 • All rights reserved.
for 3
1
1