Cub Cadet RZT L Serie Manual Del Operador página 18

Ocultar thumbs Ver también para RZT L Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turning While Driving Rearward
To turn the tractor while driving rearward, move the control
levers as necessary so that one lever is forward of the other. The
tractor will turn in the direction of the forward control lever.
1.
To turn to the left while traveling in reverse, move the left
drive control lever forward of the right lever. See Figure 5-7.
Rearward Left Turn
2.
To turn to the right while traveling in reverse, move the right
drive control lever forward of the left lever. See Figure 5-8.
3.
The greater the distance between the two levers, the
sharper the tractor will turn.
4.
To execute a "pivot turn," move the turn side drive control
lever to the neutral position, while moving the other
control lever rearward.
NOTE: Making a "pivot turn" on grass will greatly increase
the potential for defacement of the turf.
18
S
5— o
ection
peration
Figure 5-7
Rearward Right Turn
Figure 5-8
Reverse Caution Mode
The REVERSE CAUTION MODE
module allows the tractor to be operated in reverse with the
blades (PTO) engaged.
NOTE: Mowing in reverse is not recommended.
WARNING!
Use extreme caution while operating
the tractor in the REVERSE CAUTION MODE
Always look down and behind before and while
backing. Do not operate the tractor when children
or others are around. Stop the tractor immediately if
someone enters the area.
To use the REVERSE CAUTION MODE
NOTE: The operator MUST be seated in the tractor seat.
1.
Start the engine as instructed on the previous page.
2.
Turn the key from the NORMAL MOWING
position to the REVERSE CAUTION MODE
(Yellow) position of the key switch module. See Figure
5-9.
Indicator
Light
Stop
Position
Figure 5-9
3.
Press the REVERSE PUSH BUTTON
Button) at the top, right corner of the key switch module.
The red indicator light at the top, left corner of the key
switch module will be ON while activated. See Figure 5-9.
4.
Once activated (indicator light ON), the tractor can be
driven in reverse with the cutting blades (PTO) engaged.
5.
Always look down and behind before and while backing to
make sure no children are around. After resuming forward
motion, return the key to the NORMAL MOWING
position.
The REVERSE CAUTION MODE
a.
The key is placed in either the NORMAL MOWING
position or STOP
b.
The operator leaves the seat.
position of the key switch
:
(Green)
Reverse
Push Button
Reverse
Caution Mode
Position
Start
Position
(Orange, Triangular
will remain activated until:
position or
.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido