Cebora 108.00 Manual De Instrucciones página 11

CEBORA S.p.A
2 GENERAL DESCRIPTION.
This Instruction Manual refers to the Analog Interface Kit, art. 108.00 and has been prepared in order to
instruct the staff assigned to the installation, the operation and the maintenance of the plasma system.
It must be conserved with care, in a famous place to the several one interested, it have to be consulted
every time are doubts and employee for the replacement parts request and will have to follow all the
operating life of the machine.
WARNING ! Operating the equipment incorrectly and work that is not carried out correctly
can cause serious injury and damage.
Do not use the functions described here until you have read and completely
understood all of the following documents:
- this Instructions Manual;
- Instructions Manual of equipments componing the Plasma Cutting System (e.g.:
Power Source, Gas Console, Pantograph Control Panel, included witch of
eventual option).
3 KIT COMPOSITION.
The Analog Interface Kit, art. 108.00 is made up of the elements visible in fig. 3.
Part.
Preassembled wiring with 14 poles female panel
1
connector and multipoles flying connectors.
2 14 poles male flying connector.
3 Remote board.
3.300.232-B
fig. 3
Description Code Q.ty
5585934 1
5602252 1
04/03/2016
11
GB