Cycle Option Buttons; Delay Start; Nd Rinse; Stain Treat - KENMORE ELITE 796.4102 Manual De Uso Y Cuidado

CYCLE OPTION BUTTONS

Your washing machine features several additional cycle
options to customize cycles to meet your individual needs.
1
Turn ON the washer and turn the cycle selector knob to
select the desired cycle.
2
Use the cycle modifier buttons to adjust the settings for
that cycle.
3
Press the cycle option button(s) for the option(s) you
would like to add. The button will light when that option
is selected.
If the selected option is not allowed for the selected
cycle, the chime will sound twice to inform you that it is
not allowed.
4
Press the START/PAUSE button to start the cycle. The
washer will start automatically after a brief delay for
locking the door.
NOTE: To protect your garments, not every option is
available with every cycle. See the CYCLE GUIDE on page
14 for details.
NOTE: If the START/PAUSE button is not pressed within 4
minutes, the control will shut off and the settings will be lost.

DELAY START

Once you have selected the cycle and other
settings, press this button to delay the start
of the wash cycle. Each press of the button
increases the delay time by one hour, for up
to 19 hours. Once the desired delay time is
set, press the START/PAUSE button to start the delay time.
nd
2 RINSE
This option will add an extra rinse to the
selected cycle. Use this option to help
ensure the removal of detergent or bleach
residue from fabrics.
NOTE: 2 nd Rinse and Smart Sense cannot be selected
simultaneously.

STAIN TREAT

Use this option for heavily soiled loads that
need improved stain treatment. When
STAIN TREAT is selected, the water
temperature for the selected cycle will begin
as warm water to help prevent the setting of
certain types of stains. Then as the cycle progresses, the
water will be heated to higher temperatures to help remove
stains that require treatment at higher temperatures. This
option is designed for optimum stain removal.
NOTE:
• If STAIN TREAT is selected with the SANITIZE cycle, the
cycle will begin with very hot water since that is default for
that cycle and cannot be changed.
HOW TO USE

AUTO SOAK

1
Add detergent only to the Main wash compartment or
Liquid Box of the dispenser drawer.
2
Select desired cycle.
3
Select cycle modifiers.
4
Press the START/PAUSE.
21
Use the AUTO SOAK option to presoak
garments to help remove difficult spots or
stains on fabrics. This option provides a 30
minute presoak prior to the start of the
selected cycle.