brondell Swash CL825-EW El Manual Del Propietario página 23

SWASH SPECIAL MODE OPERATIONS (cont.)
Selecting/Canceling Silent Mode
1. Press and hold down the "Power" and "Rear Cleansing" auxiliary buttons simultaneously for
approximately 5 seconds until all the seat display lights start flashing.
2. Press the "Power" button to Set or Cancel silent mode.
a. If Power indicator light is turned on, this indicates the Silent Mode has been set.
b. If Power indicator light is turned off, this indicates the Silent Mode has been canceled.
3. The new setting will automatically be saved within 10 seconds if no other buttons are
pressed.
Selecting/Canceling Seat Sensor Lock Mode
This function bypasses the sensor located in the seat and allows the wash functions to
operate without the sensor being engaged. Use caution in this mode.
1. Press and hold down the "Power" and "Rear Cleansing" auxiliary buttons simultaneously for
approximately 5 seconds until all the seat display lights start flashing.
2. Press the "Nozzle Cleaning" button to Set or Cancel seat sensor lock mode.
a. If Seat Temp. indicator light is turned on, this indicates the Seat Sensor Lock Mode has
been set.
b. If Seat Temp. indicator light is turned off, this indicates the Seat Sensor Lock Mode has
been canceled. The sensor in the seat is now bypassed and the wash functions will work
without anyone physically on the seat. Use caution.
3. The new setting will automatically be saved within 10 seconds if no other buttons are
pressed.
21