Promax TG-140 Manual De Instrucciones página 42

The TG-140 includes a Rescue Compact Flash. The user of the TG-140 can
replace the Hard Disk by an equivalent one. Partitioning, creating file systems and
installing the all the TG-140 software in the new hard disk is only four keystrokes away
by using the Rescue Compact Flash. The Rescue Compact Flash will restore the
complete system on the newly plugged hard disk and it will be ready to use after a
restart. This drastically shortens the time to repair a TG-140 whose hard disk has failed.
When the TG-140 starts it recovers the state of the Player when the TG-140 was
turned off by the last time. If the Player was playing a file with a given configuration the
TG-140 will automatically play the same file with the same configuration after it starts
up. The TG-140 recovers the state of the Player only when this was started from the
front panel. When the power is restored after a power cut the same principle applies.
The TG-140 can be used in three different ways. The basic operations of the
TG-140, Player and Recorder, can be controlled by pressing and turning the two
buttons and one Knob in the front of the equipment. The rest of the software programs -
TS Analyzer, TS Demuxer, and TS Builder- are accessed either connecting a keyboard,
mouse and VGA screen or through a network cable.
Page 2
Figure 3.- TG-140 Rear Side.
USER'S MANUAL. TG-140
02/2013