Allow For Remote Control; Copy / Delete Files; Copy A File; Delete A File - Promax TG-140 Manual De Instrucciones

4.7 Allow for Remote Control

The TG-140 can be controlled either from the front panel or not. When using it
from the front panel we name it Local Control.
Remote Control includes controlling the TG-140 through a network or by plugging
a keyboard, mouse and VGA screen.
The TG-140 can be under Remote Control, under Local Control or uncontrolled.
When the TG-140 is under Local Control it is not accessible from Remote Control
and the other way round. There is a lock to gain control of the TG-140. This lock is
owned by either the front panel software or the graphical interface software. This lock
can be acquired and released as I explain in the next lines.
To acquire the lock to use the TG-140 from the front panel go to Local Control
and press the Knob. If the lock cannot be acquired because the TG-140 is being remote
controlled you will see an error message. To release the lock go to Remote Control and
press then Knob. When the user presses the Knob on Remote Control the player and
the recorder in Local Control are stopped if they were on.
The lock is acquired in Remote Control when the Player or Recorder Graphical
Interface Software are started. Actually if the TG-140 is in Local Control the Player and
Recorder will display an error message and will refuse to start. To release the lock just
close the Player and the Recorder.
The TG-140 starts up in uncontrolled mode except in the case I explain right here.
When you turn off the TG-140 it stores the state of the of the Local Control Player. If you
were playing a file in Local Control and you turn off the TG-140 when you turn it on
again it will automatically start playing that file in Local Control. In this case it will be
locked to use in Local Control until the user releases it.
4.8

Copy / Delete Files

4.8.1 Copy a file

To copy a file go to : Copy File menu and press the knob. The message Copy
File / File: + file name ( or Dir to go into a folder. To go back press the knob when the
display shows " : .. ") appears. When the file is localized press the knob. Following the
Destination (.): message is showed, then use the knob to navigate trough the menus
and copy the file in the selected folder when the display shows Destination(.): . . If the
display shows Copied: (file name) the operation has been finished successfully.

4.8.2 Delete a file

To delete a file go to Delete File menu and press the Knob. Following the
message Delete File/File: + file name (or Delete File/Enter Dir: + file name) is
showed. Then select the file navigating with the knob and press it when the name file is
displayed. If the display shows Deleted: + file name the operation has been finished
successfully.
Page 14
USER'S MANUAL. TG-140
02/2013